# axi-ad9081-rx-hpc


## Device Attributes

| Name | Default value |
| ---- | ------------- |
| adc_clk_powerdown |  |
| filter_fir_config |  |
| jesd204_fsm_ctrl |  |
| jesd204_fsm_error |  |
| jesd204_fsm_paused |  |
| jesd204_fsm_resume |  |
| jesd204_fsm_state |  |
| loopback_mode |  |
| loopback_mode_available |  |
| multichip_sync |  |
| powerdown |  |
| sync_start_enable |  |
| sync_start_enable_available |  |




## Channel Attributes

### temp0

| Name | sysfs filename | Default value |
| ---- | -------------- | ------------- |
| input | in_temp0_input |  |
| label | in_temp0_label |  |


**iio_attr example:**

```bash
iio_attr -u ip:analog -c axi-ad9081-rx-hpc temp0 input
```

**Python bindings example:**

```python
import iio
ctx = iio.Context("ip:analog")
dev = ctx.find_device("axi-ad9081-rx-hpc")
chan = dev.find_channel("temp0")
rval = chan.attrs["input"].value
```

***
### voltage0_i

| Name | sysfs filename | Default value |
| ---- | -------------- | ------------- |
| channel_nco_frequency | out_voltage0_i_channel_nco_frequency |  |
| channel_nco_frequency_available | out_voltage_channel_nco_frequency_available |  |
| channel_nco_gain_scale | out_voltage0_i_channel_nco_gain_scale |  |
| channel_nco_phase | out_voltage0_i_channel_nco_phase |  |
| channel_nco_test_tone_en | out_voltage0_i_channel_nco_test_tone_en |  |
| channel_nco_test_tone_scale | out_voltage0_i_channel_nco_test_tone_scale |  |
| dac_frequency | out_voltage_dac_frequency |  |
| en | out_voltage0_i_en |  |
| label | out_voltage0_i_label |  |
| main_ffh_gpio_mode_en | out_voltage_main_ffh_gpio_mode_en |  |
| main_ffh_mode | out_voltage0_i_main_ffh_mode |  |
| main_ffh_mode_available | out_voltage_main_ffh_mode_available |  |
| main_nco_ffh_frequency | out_voltage0_i_main_nco_ffh_frequency |  |
| main_nco_ffh_index | out_voltage0_i_main_nco_ffh_index |  |
| main_nco_ffh_select | out_voltage0_i_main_nco_ffh_select |  |
| main_nco_frequency | out_voltage0_i_main_nco_frequency |  |
| main_nco_frequency_available | out_voltage_main_nco_frequency_available |  |
| main_nco_phase | out_voltage0_i_main_nco_phase |  |
| main_nco_test_tone_en | out_voltage0_i_main_nco_test_tone_en |  |
| main_nco_test_tone_scale | out_voltage0_i_main_nco_test_tone_scale |  |
| sampling_frequency | out_voltage_sampling_frequency |  |


**iio_attr example:**

```bash
iio_attr -u ip:analog -c axi-ad9081-rx-hpc voltage0_i channel_nco_frequency
```

**Python bindings example:**

```python
import iio
ctx = iio.Context("ip:analog")
dev = ctx.find_device("axi-ad9081-rx-hpc")
chan = dev.find_channel("voltage0_i")
rval = chan.attrs["channel_nco_frequency"].value
```

***
### voltage0_q

| Name | sysfs filename | Default value |
| ---- | -------------- | ------------- |
| channel_nco_frequency | out_voltage0_q_channel_nco_frequency |  |
| channel_nco_frequency_available | out_voltage_channel_nco_frequency_available |  |
| channel_nco_gain_scale | out_voltage0_q_channel_nco_gain_scale |  |
| channel_nco_phase | out_voltage0_q_channel_nco_phase |  |
| channel_nco_test_tone_en | out_voltage0_q_channel_nco_test_tone_en |  |
| channel_nco_test_tone_scale | out_voltage0_q_channel_nco_test_tone_scale |  |
| dac_frequency | out_voltage_dac_frequency |  |
| en | out_voltage0_q_en |  |
| label | out_voltage0_q_label |  |
| main_ffh_gpio_mode_en | out_voltage_main_ffh_gpio_mode_en |  |
| main_ffh_mode | out_voltage0_q_main_ffh_mode |  |
| main_ffh_mode_available | out_voltage_main_ffh_mode_available |  |
| main_nco_ffh_frequency | out_voltage0_q_main_nco_ffh_frequency |  |
| main_nco_ffh_index | out_voltage0_q_main_nco_ffh_index |  |
| main_nco_ffh_select | out_voltage0_q_main_nco_ffh_select |  |
| main_nco_frequency | out_voltage0_q_main_nco_frequency |  |
| main_nco_frequency_available | out_voltage_main_nco_frequency_available |  |
| main_nco_phase | out_voltage0_q_main_nco_phase |  |
| main_nco_test_tone_en | out_voltage0_q_main_nco_test_tone_en |  |
| main_nco_test_tone_scale | out_voltage0_q_main_nco_test_tone_scale |  |
| sampling_frequency | out_voltage_sampling_frequency |  |


**iio_attr example:**

```bash
iio_attr -u ip:analog -c axi-ad9081-rx-hpc voltage0_q channel_nco_frequency
```

**Python bindings example:**

```python
import iio
ctx = iio.Context("ip:analog")
dev = ctx.find_device("axi-ad9081-rx-hpc")
chan = dev.find_channel("voltage0_q")
rval = chan.attrs["channel_nco_frequency"].value
```

***
### voltage1_i

| Name | sysfs filename | Default value |
| ---- | -------------- | ------------- |
| channel_nco_frequency | out_voltage1_i_channel_nco_frequency |  |
| channel_nco_frequency_available | out_voltage_channel_nco_frequency_available |  |
| channel_nco_gain_scale | out_voltage1_i_channel_nco_gain_scale |  |
| channel_nco_phase | out_voltage1_i_channel_nco_phase |  |
| channel_nco_test_tone_en | out_voltage1_i_channel_nco_test_tone_en |  |
| channel_nco_test_tone_scale | out_voltage1_i_channel_nco_test_tone_scale |  |
| dac_frequency | out_voltage_dac_frequency |  |
| en | out_voltage1_i_en |  |
| label | out_voltage1_i_label |  |
| main_ffh_gpio_mode_en | out_voltage_main_ffh_gpio_mode_en |  |
| main_ffh_mode | out_voltage1_i_main_ffh_mode |  |
| main_ffh_mode_available | out_voltage_main_ffh_mode_available |  |
| main_nco_ffh_frequency | out_voltage1_i_main_nco_ffh_frequency |  |
| main_nco_ffh_index | out_voltage1_i_main_nco_ffh_index |  |
| main_nco_ffh_select | out_voltage1_i_main_nco_ffh_select |  |
| main_nco_frequency | out_voltage1_i_main_nco_frequency |  |
| main_nco_frequency_available | out_voltage_main_nco_frequency_available |  |
| main_nco_phase | out_voltage1_i_main_nco_phase |  |
| main_nco_test_tone_en | out_voltage1_i_main_nco_test_tone_en |  |
| main_nco_test_tone_scale | out_voltage1_i_main_nco_test_tone_scale |  |
| sampling_frequency | out_voltage_sampling_frequency |  |


**iio_attr example:**

```bash
iio_attr -u ip:analog -c axi-ad9081-rx-hpc voltage1_i channel_nco_frequency
```

**Python bindings example:**

```python
import iio
ctx = iio.Context("ip:analog")
dev = ctx.find_device("axi-ad9081-rx-hpc")
chan = dev.find_channel("voltage1_i")
rval = chan.attrs["channel_nco_frequency"].value
```

***
### voltage1_q

| Name | sysfs filename | Default value |
| ---- | -------------- | ------------- |
| channel_nco_frequency | out_voltage1_q_channel_nco_frequency |  |
| channel_nco_frequency_available | out_voltage_channel_nco_frequency_available |  |
| channel_nco_gain_scale | out_voltage1_q_channel_nco_gain_scale |  |
| channel_nco_phase | out_voltage1_q_channel_nco_phase |  |
| channel_nco_test_tone_en | out_voltage1_q_channel_nco_test_tone_en |  |
| channel_nco_test_tone_scale | out_voltage1_q_channel_nco_test_tone_scale |  |
| dac_frequency | out_voltage_dac_frequency |  |
| en | out_voltage1_q_en |  |
| label | out_voltage1_q_label |  |
| main_ffh_gpio_mode_en | out_voltage_main_ffh_gpio_mode_en |  |
| main_ffh_mode | out_voltage1_q_main_ffh_mode |  |
| main_ffh_mode_available | out_voltage_main_ffh_mode_available |  |
| main_nco_ffh_frequency | out_voltage1_q_main_nco_ffh_frequency |  |
| main_nco_ffh_index | out_voltage1_q_main_nco_ffh_index |  |
| main_nco_ffh_select | out_voltage1_q_main_nco_ffh_select |  |
| main_nco_frequency | out_voltage1_q_main_nco_frequency |  |
| main_nco_frequency_available | out_voltage_main_nco_frequency_available |  |
| main_nco_phase | out_voltage1_q_main_nco_phase |  |
| main_nco_test_tone_en | out_voltage1_q_main_nco_test_tone_en |  |
| main_nco_test_tone_scale | out_voltage1_q_main_nco_test_tone_scale |  |
| sampling_frequency | out_voltage_sampling_frequency |  |


**iio_attr example:**

```bash
iio_attr -u ip:analog -c axi-ad9081-rx-hpc voltage1_q channel_nco_frequency
```

**Python bindings example:**

```python
import iio
ctx = iio.Context("ip:analog")
dev = ctx.find_device("axi-ad9081-rx-hpc")
chan = dev.find_channel("voltage1_q")
rval = chan.attrs["channel_nco_frequency"].value
```

***
### voltage2_i

| Name | sysfs filename | Default value |
| ---- | -------------- | ------------- |
| channel_nco_frequency | out_voltage2_i_channel_nco_frequency |  |
| channel_nco_frequency_available | out_voltage_channel_nco_frequency_available |  |
| channel_nco_gain_scale | out_voltage2_i_channel_nco_gain_scale |  |
| channel_nco_phase | out_voltage2_i_channel_nco_phase |  |
| channel_nco_test_tone_en | out_voltage2_i_channel_nco_test_tone_en |  |
| channel_nco_test_tone_scale | out_voltage2_i_channel_nco_test_tone_scale |  |
| dac_frequency | out_voltage_dac_frequency |  |
| en | out_voltage2_i_en |  |
| label | out_voltage2_i_label |  |
| main_ffh_gpio_mode_en | out_voltage_main_ffh_gpio_mode_en |  |
| main_ffh_mode | out_voltage2_i_main_ffh_mode |  |
| main_ffh_mode_available | out_voltage_main_ffh_mode_available |  |
| main_nco_ffh_frequency | out_voltage2_i_main_nco_ffh_frequency |  |
| main_nco_ffh_index | out_voltage2_i_main_nco_ffh_index |  |
| main_nco_ffh_select | out_voltage2_i_main_nco_ffh_select |  |
| main_nco_frequency | out_voltage2_i_main_nco_frequency |  |
| main_nco_frequency_available | out_voltage_main_nco_frequency_available |  |
| main_nco_phase | out_voltage2_i_main_nco_phase |  |
| main_nco_test_tone_en | out_voltage2_i_main_nco_test_tone_en |  |
| main_nco_test_tone_scale | out_voltage2_i_main_nco_test_tone_scale |  |
| sampling_frequency | out_voltage_sampling_frequency |  |


**iio_attr example:**

```bash
iio_attr -u ip:analog -c axi-ad9081-rx-hpc voltage2_i channel_nco_frequency
```

**Python bindings example:**

```python
import iio
ctx = iio.Context("ip:analog")
dev = ctx.find_device("axi-ad9081-rx-hpc")
chan = dev.find_channel("voltage2_i")
rval = chan.attrs["channel_nco_frequency"].value
```

***
### voltage2_q

| Name | sysfs filename | Default value |
| ---- | -------------- | ------------- |
| channel_nco_frequency | out_voltage2_q_channel_nco_frequency |  |
| channel_nco_frequency_available | out_voltage_channel_nco_frequency_available |  |
| channel_nco_gain_scale | out_voltage2_q_channel_nco_gain_scale |  |
| channel_nco_phase | out_voltage2_q_channel_nco_phase |  |
| channel_nco_test_tone_en | out_voltage2_q_channel_nco_test_tone_en |  |
| channel_nco_test_tone_scale | out_voltage2_q_channel_nco_test_tone_scale |  |
| dac_frequency | out_voltage_dac_frequency |  |
| en | out_voltage2_q_en |  |
| label | out_voltage2_q_label |  |
| main_ffh_gpio_mode_en | out_voltage_main_ffh_gpio_mode_en |  |
| main_ffh_mode | out_voltage2_q_main_ffh_mode |  |
| main_ffh_mode_available | out_voltage_main_ffh_mode_available |  |
| main_nco_ffh_frequency | out_voltage2_q_main_nco_ffh_frequency |  |
| main_nco_ffh_index | out_voltage2_q_main_nco_ffh_index |  |
| main_nco_ffh_select | out_voltage2_q_main_nco_ffh_select |  |
| main_nco_frequency | out_voltage2_q_main_nco_frequency |  |
| main_nco_frequency_available | out_voltage_main_nco_frequency_available |  |
| main_nco_phase | out_voltage2_q_main_nco_phase |  |
| main_nco_test_tone_en | out_voltage2_q_main_nco_test_tone_en |  |
| main_nco_test_tone_scale | out_voltage2_q_main_nco_test_tone_scale |  |
| sampling_frequency | out_voltage_sampling_frequency |  |


**iio_attr example:**

```bash
iio_attr -u ip:analog -c axi-ad9081-rx-hpc voltage2_q channel_nco_frequency
```

**Python bindings example:**

```python
import iio
ctx = iio.Context("ip:analog")
dev = ctx.find_device("axi-ad9081-rx-hpc")
chan = dev.find_channel("voltage2_q")
rval = chan.attrs["channel_nco_frequency"].value
```

***
### voltage3_i

| Name | sysfs filename | Default value |
| ---- | -------------- | ------------- |
| channel_nco_frequency | out_voltage3_i_channel_nco_frequency |  |
| channel_nco_frequency_available | out_voltage_channel_nco_frequency_available |  |
| channel_nco_gain_scale | out_voltage3_i_channel_nco_gain_scale |  |
| channel_nco_phase | out_voltage3_i_channel_nco_phase |  |
| channel_nco_test_tone_en | out_voltage3_i_channel_nco_test_tone_en |  |
| channel_nco_test_tone_scale | out_voltage3_i_channel_nco_test_tone_scale |  |
| dac_frequency | out_voltage_dac_frequency |  |
| en | out_voltage3_i_en |  |
| label | out_voltage3_i_label |  |
| main_ffh_gpio_mode_en | out_voltage_main_ffh_gpio_mode_en |  |
| main_ffh_mode | out_voltage3_i_main_ffh_mode |  |
| main_ffh_mode_available | out_voltage_main_ffh_mode_available |  |
| main_nco_ffh_frequency | out_voltage3_i_main_nco_ffh_frequency |  |
| main_nco_ffh_index | out_voltage3_i_main_nco_ffh_index |  |
| main_nco_ffh_select | out_voltage3_i_main_nco_ffh_select |  |
| main_nco_frequency | out_voltage3_i_main_nco_frequency |  |
| main_nco_frequency_available | out_voltage_main_nco_frequency_available |  |
| main_nco_phase | out_voltage3_i_main_nco_phase |  |
| main_nco_test_tone_en | out_voltage3_i_main_nco_test_tone_en |  |
| main_nco_test_tone_scale | out_voltage3_i_main_nco_test_tone_scale |  |
| sampling_frequency | out_voltage_sampling_frequency |  |


**iio_attr example:**

```bash
iio_attr -u ip:analog -c axi-ad9081-rx-hpc voltage3_i channel_nco_frequency
```

**Python bindings example:**

```python
import iio
ctx = iio.Context("ip:analog")
dev = ctx.find_device("axi-ad9081-rx-hpc")
chan = dev.find_channel("voltage3_i")
rval = chan.attrs["channel_nco_frequency"].value
```

***
### voltage3_q

| Name | sysfs filename | Default value |
| ---- | -------------- | ------------- |
| channel_nco_frequency | out_voltage3_q_channel_nco_frequency |  |
| channel_nco_frequency_available | out_voltage_channel_nco_frequency_available |  |
| channel_nco_gain_scale | out_voltage3_q_channel_nco_gain_scale |  |
| channel_nco_phase | out_voltage3_q_channel_nco_phase |  |
| channel_nco_test_tone_en | out_voltage3_q_channel_nco_test_tone_en |  |
| channel_nco_test_tone_scale | out_voltage3_q_channel_nco_test_tone_scale |  |
| dac_frequency | out_voltage_dac_frequency |  |
| en | out_voltage3_q_en |  |
| label | out_voltage3_q_label |  |
| main_ffh_gpio_mode_en | out_voltage_main_ffh_gpio_mode_en |  |
| main_ffh_mode | out_voltage3_q_main_ffh_mode |  |
| main_ffh_mode_available | out_voltage_main_ffh_mode_available |  |
| main_nco_ffh_frequency | out_voltage3_q_main_nco_ffh_frequency |  |
| main_nco_ffh_index | out_voltage3_q_main_nco_ffh_index |  |
| main_nco_ffh_select | out_voltage3_q_main_nco_ffh_select |  |
| main_nco_frequency | out_voltage3_q_main_nco_frequency |  |
| main_nco_frequency_available | out_voltage_main_nco_frequency_available |  |
| main_nco_phase | out_voltage3_q_main_nco_phase |  |
| main_nco_test_tone_en | out_voltage3_q_main_nco_test_tone_en |  |
| main_nco_test_tone_scale | out_voltage3_q_main_nco_test_tone_scale |  |
| sampling_frequency | out_voltage_sampling_frequency |  |


**iio_attr example:**

```bash
iio_attr -u ip:analog -c axi-ad9081-rx-hpc voltage3_q channel_nco_frequency
```

**Python bindings example:**

```python
import iio
ctx = iio.Context("ip:analog")
dev = ctx.find_device("axi-ad9081-rx-hpc")
chan = dev.find_channel("voltage3_q")
rval = chan.attrs["channel_nco_frequency"].value
```

***