# adrv9002-phy


## Device Attributes

| Name | Default value |
| ---- | ------------- |
| profile_config |  |
| stream_config |  |




## Channel Attributes

### altvoltage0

| Name | sysfs filename | Default value |
| ---- | -------------- | ------------- |
| RX1_LO_frequency | out_altvoltage0_RX1_LO_frequency |  |


**iio_attr example:**

```bash
iio_attr -u ip:analog -c adrv9002-phy altvoltage0 RX1_LO_frequency
```

**Python bindings example:**

```python
import iio
ctx = iio.Context("ip:analog")
dev = ctx.find_device("adrv9002-phy")
chan = dev.find_channel("altvoltage0")
rval = chan.attrs["RX1_LO_frequency"].value
```

***
### altvoltage1

| Name | sysfs filename | Default value |
| ---- | -------------- | ------------- |
| RX2_LO_frequency | out_altvoltage1_RX2_LO_frequency |  |


**iio_attr example:**

```bash
iio_attr -u ip:analog -c adrv9002-phy altvoltage1 RX2_LO_frequency
```

**Python bindings example:**

```python
import iio
ctx = iio.Context("ip:analog")
dev = ctx.find_device("adrv9002-phy")
chan = dev.find_channel("altvoltage1")
rval = chan.attrs["RX2_LO_frequency"].value
```

***
### altvoltage2

| Name | sysfs filename | Default value |
| ---- | -------------- | ------------- |
| TX1_LO_frequency | out_altvoltage2_TX1_LO_frequency |  |


**iio_attr example:**

```bash
iio_attr -u ip:analog -c adrv9002-phy altvoltage2 TX1_LO_frequency
```

**Python bindings example:**

```python
import iio
ctx = iio.Context("ip:analog")
dev = ctx.find_device("adrv9002-phy")
chan = dev.find_channel("altvoltage2")
rval = chan.attrs["TX1_LO_frequency"].value
```

***
### altvoltage3

| Name | sysfs filename | Default value |
| ---- | -------------- | ------------- |
| TX2_LO_frequency | out_altvoltage3_TX2_LO_frequency |  |


**iio_attr example:**

```bash
iio_attr -u ip:analog -c adrv9002-phy altvoltage3 TX2_LO_frequency
```

**Python bindings example:**

```python
import iio
ctx = iio.Context("ip:analog")
dev = ctx.find_device("adrv9002-phy")
chan = dev.find_channel("altvoltage3")
rval = chan.attrs["TX2_LO_frequency"].value
```

***
### temp0

| Name | sysfs filename | Default value |
| ---- | -------------- | ------------- |
| input | in_temp0_input |  |


**iio_attr example:**

```bash
iio_attr -u ip:analog -c adrv9002-phy temp0 input
```

**Python bindings example:**

```python
import iio
ctx = iio.Context("ip:analog")
dev = ctx.find_device("adrv9002-phy")
chan = dev.find_channel("temp0")
rval = chan.attrs["input"].value
```

***
### voltage0

| Name | sysfs filename | Default value |
| ---- | -------------- | ------------- |
| agc_tracking_en | in_voltage0_agc_tracking_en |  |
| bbdc_rejection_en | in_voltage0_bbdc_rejection_en |  |
| bbdc_rejection_tracking_en | in_voltage0_bbdc_rejection_tracking_en |  |
| decimated_power | in_voltage0_decimated_power |  |
| digital_gain_control_mode | in_voltage0_digital_gain_control_mode |  |
| digital_gain_control_mode_available | in_voltage0_digital_gain_control_mode_available |  |
| dynamic_adc_switch_en | in_voltage0_dynamic_adc_switch_en |  |
| en | in_voltage0_en |  |
| ensm_mode | in_voltage0_ensm_mode |  |
| ensm_mode_available | in_voltage0_ensm_mode_available |  |
| gain_control_mode | in_voltage0_gain_control_mode |  |
| gain_control_mode_available | in_voltage0_gain_control_mode_available |  |
| hardwaregain | in_voltage0_hardwaregain |  |
| hd_tracking_en | in_voltage0_hd_tracking_en |  |
| interface_gain | in_voltage0_interface_gain |  |
| interface_gain_available | in_voltage0_interface_gain_available |  |
| nco_frequency | in_voltage0_nco_frequency |  |
| port_en_mode | in_voltage0_port_en_mode |  |
| port_en_mode_available | in_voltage0_port_en_mode_available |  |
| quadrature_fic_tracking_en | in_voltage0_quadrature_fic_tracking_en |  |
| quadrature_w_poly_tracking_en | in_voltage0_quadrature_w_poly_tracking_en |  |
| rf_bandwidth | in_voltage0_rf_bandwidth |  |
| rfdc_tracking_en | in_voltage0_rfdc_tracking_en |  |
| rssi | in_voltage0_rssi |  |
| rssi_tracking_en | in_voltage0_rssi_tracking_en |  |
| sampling_frequency | in_voltage0_sampling_frequency |  |


**iio_attr example:**

```bash
iio_attr -u ip:analog -c adrv9002-phy voltage0 agc_tracking_en
```

**Python bindings example:**

```python
import iio
ctx = iio.Context("ip:analog")
dev = ctx.find_device("adrv9002-phy")
chan = dev.find_channel("voltage0")
rval = chan.attrs["agc_tracking_en"].value
```

***
### voltage1

| Name | sysfs filename | Default value |
| ---- | -------------- | ------------- |
| atten_control_mode | out_voltage1_atten_control_mode |  |
| atten_control_mode_available | out_voltage1_atten_control_mode_available |  |
| close_loop_gain_tracking_en | out_voltage1_close_loop_gain_tracking_en |  |
| en | out_voltage1_en |  |
| ensm_mode | out_voltage1_ensm_mode |  |
| ensm_mode_available | out_voltage1_ensm_mode_available |  |
| hardwaregain | out_voltage1_hardwaregain |  |
| lo_leakage_tracking_en | out_voltage1_lo_leakage_tracking_en |  |
| loopback_delay_tracking_en | out_voltage1_loopback_delay_tracking_en |  |
| nco_frequency | out_voltage1_nco_frequency |  |
| pa_correction_tracking_en | out_voltage1_pa_correction_tracking_en |  |
| port_en_mode | out_voltage1_port_en_mode |  |
| port_en_mode_available | out_voltage1_port_en_mode_available |  |
| quadrature_tracking_en | out_voltage1_quadrature_tracking_en |  |
| rf_bandwidth | out_voltage1_rf_bandwidth |  |
| sampling_frequency | out_voltage1_sampling_frequency |  |


**iio_attr example:**

```bash
iio_attr -u ip:analog -c adrv9002-phy voltage1 atten_control_mode
```

**Python bindings example:**

```python
import iio
ctx = iio.Context("ip:analog")
dev = ctx.find_device("adrv9002-phy")
chan = dev.find_channel("voltage1")
rval = chan.attrs["atten_control_mode"].value
```

***